Base qui ne remonte pas dans le réseau Centipède

Bonjour,

Je viens de finaliser l’installation de la base.
J’ai procédé au calcul de position via le service de l’IGN
J’ai envoyé les infos au réseau Centipède.
J’ai renseigné la localisation dans les paramètres de la base
J’ai renseigné les information du caster dans NTRIP service
J’ai contrôlé que le port 2101 n’était pas bloqué sur le pare-feu

Auriez vous une idée de la source du blocage ?

Quelques captures d’écrans des paramètres de la base



Bonjour Étienne,

De ce que je vois, tout à l’air ok pour le paramétrage de ta base.
Est-ce que tu pourrais nous faire un copier/coller de ce qu’il y a dans la section str2str_ntrip_A.service de la page diagnostic ?

Exemple pour une base de test :

str2str_ntrip_A.service : Active
● str2str_ntrip_A.service - RTKBase Ntrip A
Loaded: loaded (/etc/systemd/system/str2str_ntrip_A.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2024-01-19 19:47:25 UTC; 1 weeks 3 days ago
Process: 24366 ExecStart=/home/basegnss/rtkbase/run_cast.sh in_tcp out_caster_A (code=exited, status=0/SUCCESS)
Main PID: 24373 (str2str)
Tasks: 2 (limit: 906)
Memory: 2.3M
CPU: 3h 17min 53.498s
CGroup: /system.slice/str2str_ntrip_A.service
└─24373 /usr/local/bin/str2str -in tcpcli://localhost:5015#ubx -out ntrips://:centipede@caster.centipede.fr:2101/EMO4G#rtcm3 -msg 1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230 -p 80 0 0 -opt -TADJ=1 -i RTKBase U-blox_ZED-F9P,2.4.1 1.32 -a ADVNULLANTENNA -t 2 -fl /home/basegnss/rtkbase/logs/str2str_ntrip_A.log

Jan 30 09:41:46 basegnss systemd-journald[505]: Suppressed 12 messages from str2str_ntrip_A.service
Jan 30 09:41:46 basegnss run_cast.sh[24373]: 2024/01/30 09:42:05 [CC---] -536809012 B 32255 bps (0) localhost (1) caster.centipede.fr/EMO4G
Jan 30 09:42:46 basegnss systemd-journald[505]: Suppressed 11 messages from str2str_ntrip_A.service
Jan 30 09:42:46 basegnss run_cast.sh[24373]: 2024/01/30 09:43:05 [CC---] -536558684 B 31824 bps (0) localhost (1) caster.centipede.fr/EMO4G
Jan 30 09:43:46 basegnss systemd-journald[505]: Suppressed 11 messages from str2str_ntrip_A.service
Jan 30 09:43:46 basegnss run_cast.sh[24373]: 2024/01/30 09:44:05 [CC---] -536307608 B 34282 bps (0) localhost (1) caster.centipede.fr/EMO4G
Jan 30 09:44:46 basegnss systemd-journald[505]: Suppressed 11 messages from str2str_ntrip_A.service
Jan 30 09:44:46 basegnss run_cast.sh[24373]: 2024/01/30 09:45:05 [CC---] -536060984 B 33914 bps (0) localhost (1) caster.centipede.fr/EMO4G
Jan 30 09:45:46 basegnss systemd-journald[505]: Suppressed 11 messages from str2str_ntrip_A.service
Jan 30 09:45:46 basegnss run_cast.sh[24373]: 2024/01/30 09:46:05 [CC---] -535817256 B 33738 bps (0) localhost (1) caster.centipede.fr/EMO4G

Voici

str2str_ntrip_A.service : Active
● str2str_ntrip_A.service - RTKBase Ntrip A
Loaded: loaded (/etc/systemd/system/str2str_ntrip_A.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2024-01-29 16:54:50 CET; 18h ago
Process: 13888 ExecStart=/home/basegnss/rtkbase/run_cast.sh in_tcp out_caster_A (code=exited, status=0/SUCCESS)
Main PID: 13895 (str2str)
Tasks: 2 (limit: 2059)
CGroup: /system.slice/str2str_ntrip_A.service
└─13895 /usr/local/bin/str2str -in tcpcli://localhost:5015#ubx -out ntrips://:centipede@caster.centipede.fr:2101/SMVD#rtcm3 -msg 1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230 -p 43.729196674 5.182410684 208.2786 -opt -TADJ=1 -i RTKBase Ublox_ZED-F9P,2.4.2 1.32 -a ADVNULLANTENNA -t 0 -fl /home/basegnss/rtkbase/logs/str2str_ntrip_A.log

Jan 29 16:54:50 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:54:50 basegnss systemd[1]: Started RTKBase Ntrip A.

– Logs begin at Sun 2024-01-28 06:12:13 CET, end at Tue 2024-01-30 11:48:59 CET. –
Jan 29 16:44:44 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:44:44 basegnss systemd[1]: Started RTKBase Ntrip A.
Jan 29 16:45:02 basegnss systemd[1]: Stopping RTKBase Ntrip A…
Jan 29 16:45:02 basegnss systemd[1]: str2str_ntrip_A.service: Succeeded.
Jan 29 16:45:02 basegnss systemd[1]: Stopped RTKBase Ntrip A.
Jan 29 16:45:02 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:45:02 basegnss systemd[1]: Started RTKBase Ntrip A.
Jan 29 16:45:12 basegnss systemd[1]: Stopping RTKBase Ntrip A…
Jan 29 16:45:12 basegnss systemd[1]: str2str_ntrip_A.service: Succeeded.
Jan 29 16:45:12 basegnss systemd[1]: Stopped RTKBase Ntrip A.
Jan 29 16:45:13 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:45:13 basegnss systemd[1]: Started RTKBase Ntrip A.
Jan 29 16:46:28 basegnss systemd[1]: Stopping RTKBase Ntrip A…
Jan 29 16:46:28 basegnss systemd[1]: str2str_ntrip_A.service: Succeeded.
Jan 29 16:46:28 basegnss systemd[1]: Stopped RTKBase Ntrip A.
Jan 29 16:46:28 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:46:28 basegnss systemd[1]: Started RTKBase Ntrip A.
Jan 29 16:54:50 basegnss systemd[1]: Stopping RTKBase Ntrip A…
Jan 29 16:54:50 basegnss systemd[1]: str2str_ntrip_A.service: Succeeded.
Jan 29 16:54:50 basegnss systemd[1]: Stopped RTKBase Ntrip A.
Jan 29 16:54:50 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 29 16:54:50 basegnss systemd[1]: Started RTKBase Ntrip A.

Hmmm, je ne vois pas d’info intéressante. Est-ce que tu pourrais faire la même chose pour le service str2str_tcp ?

str2str_tcp.service : Active
● str2str_tcp.service - RTKBase Tcp
Loaded: loaded (/etc/systemd/system/str2str_tcp.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2024-01-26 16:13:16 CET; 3 days ago
Process: 2316 ExecStart=/home/basegnss/rtkbase/run_cast.sh in_serial out_tcp (code=exited, status=0/SUCCESS)
Main PID: 2324 (str2str)
Tasks: 2 (limit: 2059)
CGroup: /system.slice/str2str_tcp.service
└─2324 /usr/local/bin/str2str -in serial://ttyACM0:115200:8:n:1#ubx -out tcpsvr://:5015 -b 1 -t 0 -fl /home/basegnss/rtkbase/logs/str2str_tcp.log

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

– Logs begin at Sun 2024-01-28 15:37:41 CET, end at Tue 2024-01-30 14:43:50 CET. –
– No entries –

Grrr, pas d’infos.
Est-ce que tu pourrais refaire la même manip, après un redémarrage de la base ?

Voici ce que j’ai après un reboot de l base

str2str_tcp.service : Active
● str2str_tcp.service - RTKBase Tcp
Loaded: loaded (/etc/systemd/system/str2str_tcp.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2024-01-30 16:20:19 CET; 4min 55s ago
Process: 520 ExecStart=/home/basegnss/rtkbase/run_cast.sh in_serial out_tcp (code=exited, status=0/SUCCESS)
Main PID: 594 (str2str)
Tasks: 2 (limit: 2059)
CGroup: /system.slice/str2str_tcp.service
└─594 /usr/local/bin/str2str -in serial://ttyACM0:115200:8:n:1#ubx -out tcpsvr://:5015 -b 1 -t 0 -fl /home/basegnss/rtkbase/logs/str2str_tcp.log

Jan 30 16:21:37 basegnss run_cast.sh[520]: 2024/01/30 15:21:56 [CC—] 319876 B 40067 bps (0) /dev/ttyACM0 (1) 2 clients
Jan 30 16:22:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:22:33 basegnss run_cast.sh[520]: 2024/01/30 15:22:51 [CC—] 591244 B 41085 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:22:38 basegnss run_cast.sh[520]: 2024/01/30 15:22:56 [CC—] 614824 B 39433 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:23:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:23:33 basegnss run_cast.sh[520]: 2024/01/30 15:23:51 [CC—] 883584 B 39477 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:23:38 basegnss run_cast.sh[520]: 2024/01/30 15:23:56 [CC—] 907212 B 40071 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:24:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:24:33 basegnss run_cast.sh[520]: 2024/01/30 15:24:51 [CC—] 1176416 B 39374 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:24:38 basegnss run_cast.sh[520]: 2024/01/30 15:24:56 [CC—] 1200028 B 39438 bps (0) /dev/ttyACM0 (1) 3 clients

– Logs begin at Thu 2019-02-14 11:12:00 CET, end at Tue 2024-01-30 16:24:38 CET. –
Jan 30 16:20:19 basegnss systemd[1]: Starting RTKBase Tcp…
Jan 30 16:20:19 basegnss run_cast.sh[520]: stream server start
Jan 30 16:20:19 basegnss systemd[1]: Started RTKBase Tcp.
Jan 30 16:20:19 basegnss run_cast.sh[520]: 2024/01/30 15:20:38 [CC—] 0 B 0 bps (0) /dev/ttyACM0 (1) 127.0.0.1
Jan 30 16:21:32 basegnss systemd-journald[129]: Suppressed 11 messages from str2str_tcp.service
Jan 30 16:21:32 basegnss run_cast.sh[520]: 2024/01/30 15:21:51 [CC—] 295904 B 41816 bps (0) /dev/ttyACM0 (1) 2 clients
Jan 30 16:21:37 basegnss run_cast.sh[520]: 2024/01/30 15:21:56 [CC—] 319876 B 40067 bps (0) /dev/ttyACM0 (1) 2 clients
Jan 30 16:22:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:22:33 basegnss run_cast.sh[520]: 2024/01/30 15:22:51 [CC—] 591244 B 41085 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:22:38 basegnss run_cast.sh[520]: 2024/01/30 15:22:56 [CC—] 614824 B 39433 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:23:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:23:33 basegnss run_cast.sh[520]: 2024/01/30 15:23:51 [CC—] 883584 B 39477 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:23:38 basegnss run_cast.sh[520]: 2024/01/30 15:23:56 [CC—] 907212 B 40071 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:24:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_tcp.service
Jan 30 16:24:33 basegnss run_cast.sh[520]: 2024/01/30 15:24:51 [CC—] 1176416 B 39374 bps (0) /dev/ttyACM0 (1) 3 clients
Jan 30 16:24:38 basegnss run_cast.sh[520]: 2024/01/30 15:24:56 [CC—] 1200028 B 39438 bps (0) /dev/ttyACM0 (1) 3 clients

str2str_ntrip_A.service : Active
● str2str_ntrip_A.service - RTKBase Ntrip A
Loaded: loaded (/etc/systemd/system/str2str_ntrip_A.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2024-01-30 16:20:19 CET; 4min 55s ago
Process: 546 ExecStart=/home/basegnss/rtkbase/run_cast.sh in_tcp out_caster_A (code=exited, status=0/SUCCESS)
Main PID: 597 (str2str)
Tasks: 2 (limit: 2059)
CGroup: /system.slice/str2str_ntrip_A.service
└─597 /usr/local/bin/str2str -in tcpcli://localhost:5015#ubx -out ntrips://:centipede@caster.centipede.fr:2101/SMVD#rtcm3 -msg 1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230 -p 43.729196674 5.182410684 208.2786 -opt -TADJ=1 -i RTKBase Ublox_ZED-F9P,2.4.2 1.32 -a ADVNULLANTENNA -t 0 -fl /home/basegnss/rtkbase/logs/str2str_ntrip_A.log

Jan 30 16:21:38 basegnss run_cast.sh[546]: 2024/01/30 15:21:56 [CW—] 321916 B 40007 bps (0) localhost (1) connecting…
Jan 30 16:22:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:22:33 basegnss run_cast.sh[546]: 2024/01/30 15:22:51 [CW—] 593284 B 41044 bps (0) localhost (1) connecting…
Jan 30 16:22:38 basegnss run_cast.sh[546]: 2024/01/30 15:22:56 [CW—] 616864 B 39473 bps (0) localhost (1) connecting…
Jan 30 16:23:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:23:33 basegnss run_cast.sh[546]: 2024/01/30 15:23:51 [CW—] 885624 B 40091 bps (0) localhost (1) connecting…
Jan 30 16:23:38 basegnss run_cast.sh[546]: 2024/01/30 15:23:56 [CW—] 909252 B 40131 bps (0) localhost (1) connecting…
Jan 30 16:24:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:24:33 basegnss run_cast.sh[546]: 2024/01/30 15:24:51 [CW—] 1178456 B 39512 bps (0) localhost (1) connecting…
Jan 30 16:24:38 basegnss run_cast.sh[546]: 2024/01/30 15:24:56 [CW—] 1202068 B 39438 bps (0) localhost (1) connecting…

– Logs begin at Thu 2019-02-14 11:12:00 CET, end at Tue 2024-01-30 16:24:38 CET. –
Jan 30 16:20:19 basegnss systemd[1]: Starting RTKBase Ntrip A…
Jan 30 16:20:19 basegnss systemd[1]: Started RTKBase Ntrip A.
Jan 30 16:20:19 basegnss run_cast.sh[546]: stream server start
Jan 30 16:20:19 basegnss run_cast.sh[546]: 2024/01/30 15:20:38 [CW—] 0 B 0 bps (0) localhost (1) connecting…
Jan 30 16:21:33 basegnss systemd-journald[129]: Suppressed 11 messages from str2str_ntrip_A.service
Jan 30 16:21:33 basegnss run_cast.sh[546]: 2024/01/30 15:21:51 [CW—] 297944 B 41816 bps (0) localhost (1) connecting…
Jan 30 16:21:38 basegnss run_cast.sh[546]: 2024/01/30 15:21:56 [CW—] 321916 B 40007 bps (0) localhost (1) connecting…
Jan 30 16:22:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:22:33 basegnss run_cast.sh[546]: 2024/01/30 15:22:51 [CW—] 593284 B 41044 bps (0) localhost (1) connecting…
Jan 30 16:22:38 basegnss run_cast.sh[546]: 2024/01/30 15:22:56 [CW—] 616864 B 39473 bps (0) localhost (1) connecting…
Jan 30 16:23:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:23:33 basegnss run_cast.sh[546]: 2024/01/30 15:23:51 [CW—] 885624 B 40091 bps (0) localhost (1) connecting…
Jan 30 16:23:38 basegnss run_cast.sh[546]: 2024/01/30 15:23:56 [CW—] 909252 B 40131 bps (0) localhost (1) connecting…
Jan 30 16:24:33 basegnss systemd-journald[129]: Suppressed 10 messages from str2str_ntrip_A.service
Jan 30 16:24:33 basegnss run_cast.sh[546]: 2024/01/30 15:24:51 [CW—] 1178456 B 39512 bps (0) localhost (1) connecting…
Jan 30 16:24:38 basegnss run_cast.sh[546]: 2024/01/30 15:24:56 [CW—] 1202068 B 39438 bps (0) localhost (1) connecting…

Merci !
Bon…tout à l’air d’être Ok du côté du service principal (str2str_tcp).
On voit que ça ne va pas pour le service Ntrip A (str2str_ntrip_A qui reste sur “connecting…”). Mais je ne comprends pas pourquoi.

A tout hasard, et temporairement, est-ce que dans l’adresse du caster du service ntrip A, tu pourrais remplacer caster.centipede.fr par 147.100.179.214 ?

Fait + reboot de la base

Toujours rien…
Est-ce que tu peux te connecter en ssh sur la base, et dans le terminal, lancer cette commande
ping -c 4 caster.centipede.fr

Bonjour,

Connaissez vous l’utilisateur par défaut ?

Oui ça communique

Plus ça va, plus c’est mystérieux. Quel est le modem ?

C’est un modem pro de SFR pour de la fibre dédiée

Si tu entres l’adresse http://caster.centipede.fr:2101/ dans le navigateur web d’un ordinateur branché sur le même réseau que la base, ça fonctionne ? Si oui, alors sur la base, toujours en se connectant à un terminal en SSH :

sudo apt install nmap

ensuite, je suis intéressé par la réponse de la commande

nmap -p 2101 caster.centipede.fr

Non, je n’arrive pas à joindre le site. Il faut peut-être que je spécifie un flux au niveau du pare-feu. Les flux sont bidirectionnels ?

OK, c’est ça…J’accède au site en connexion partagée.

Désolé de vous avoir mobilisé pour quelque chose d’aussi “bête”.

Je ne vois pas encore ta base sur le caster, elle est active en ce moment?

Oui elle est bien allumé et j’ai bien accès au caster centipede. du coup, je vais tenté l’opération suggérée par Stéphane